Loading design…
Hanra-s-work
This is the repository containing the development process for the physical polymorphic greek keyboard.
| Reference | Value | Description |
|---|---|---|
| Q1 | S8050 | 0.7A Ic, 20V Vce, Low Voltage High Current NPN Transistor, TO-92 |
| U1 | PCF8574T | 8-bit I/O Expander, I2C interface, interrupt output, fixed address bits 0b0100xxx, SOIC-16 |
| U2 | TPS62162DSG | 1A Step-Down Converter with DCS-Control, fixed 3.3V output, 3-17V input voltage, WSON-8 |
| U3 | ESP32-S2-WROVER | RF Module, ESP32-D0WDQ6 SoC, Wi-Fi 802.11b/g/n, 32-bit, 2.7-3.6V, onboard antenna, SMD |
| U4,U5 | MCP23017_SP | 16-bit I/O expander, I2C, interrupts, w pull-ups, SPDIP-28 |
| bulk_storer_C1,C5 | 1000uF_16V | 1000uF, 16V Electrolytic Capacitor |
| C1 | 0.1uF | Unpolarized capacitor |
| C2 | 10uF_0805_16V_lowESR | 10uF, Min. 16V, ESR<=20mΩ@1MHz, 0805, MLCC |
| C3 | 22uF_1206_25V | 22uF, Min. 25V, 20%, X5R or X7S or similar, 1206, MLCC |
|---|
| C4 | 100nF_Ceramic | 100nF Ceramic Capacitor |
|---|
| C6-C9 | 0.1uF_0603_16V | 0.1uF, Min. 16V 10%, X7R or X5R or similar |
|---|
| D1 | Blue | Light emitting diode |
|---|
| D2-D4 | Green | Light emitting diode |
|---|
| D5-D8 | WS2812B | RGB LED with integrated controller |
|---|
| DS1 | WC1602A | LCD 16x2 Alphanumeric , 8 bit parallel bus, 5V VDD |
|---|
| J1 | PINHD_1x4_Male | Pin Header male with pin space 2.54mm. Pin Count -4 |
|---|
| J2 | PINHD_1x2_Male | Pin Header male with pin space 2.54mm. Pin Count -2 |
|---|
| J3 | USB_C_Receptacle | USB 2.0-only Type-C Receptacle connector |
|---|
| J4 | Conn_01x11_Pin | Generic connector, single row, 01x11, script generated |
|---|
| J5 | Conn_01x11_Socket | Generic connector, single row, 01x11, script generated |
|---|
| L1 | 2.2uH_2.4A_2016 | 2.2uH, Isat>2.4A, Imax>=1.8A, Rdc<=120mOhms, shielded |
|---|
| L2 | FerriteBead_0603_1.5A | Chip Bead, Ferrite Chip Bead, Z=30Ω @ 100MHz, RmaxDC=90mΩ, ImaxDC=1.5A |
|---|
| POT1 | 16mm_CtrDet_10k | 10k Linear, 16mm pot, Center Detent, D-shaft |
|---|
| R1-R3,R5 | 1k | 1kΩ, 1/4W Resistor |
|---|
| R4,R6,R7 | 47k | 47kΩ, 1/4W Resistor |
|---|
| R8 | 100k | 100kΩ, 1/4W Resistor |
|---|
| R9,R10,R19,R21,R23,R25 | 10k_0402 | 10k, 1%, 1/16W, 0603 |
|---|
| R11,R12 | 5.1k | Resistor |
|---|
| R13,R14 | 22ohm | 20kΩ, 1/4W Resistor |
|---|
| R15,R17 | 68ohm | 100Ω, 1/4W Resistor |
|---|
| R16 | 220ohm | 220Ω, 1/4W Resistor |
|---|
| R18,R20,R22,R24,R26-R29 | 330ohm | 330Ω, 1/4W Resistor |
|---|
| RV1 | potentiometer_RM065 | potentiometer RM065 |
|---|
| SW1 | RotaryEncoder_Switch_MP | Rotary encoder, dual channel, incremental quadrate outputs, with switch and MP Pin |
|---|
| SW2 | SW_Wuerth_450301014042 | Switch slide, single pole double throw |
|---|
| SW3,SW4 | Push_Button | Common 6mmx6mm Push Button |
|---|
| SW5 | SW_SP4T_NR01104 | NKK Switches NR01 Series rotary SP4T switch |
|---|
| SW6-SW9 | SW_SPST | Single Pole Single Throw (SPST) switch |
|---|
| TP1-TP3 | TestPoint_2Pole | 2-polar test point |
|---|