Loading design…
HKUST-Red-Bird-Racing-EVRT
ELEC Github Repo for Gen 6
| Reference | Value | Description |
|---|---|---|
| Q1-Q9,Q11-Q15 | DMG1012UW | N-MOSFET transistor, gate/source/drain |
| Q10 | KY2N7002 | 0.115A Id, 60V Vds, N-Channel MOSFET, SOT-23 |
| U1 | ATmega328P-A | 20MHz, 32kB Flash, 2kB SRAM, 1kB EEPROM, TQFP-32 |
| U2 | MCP2515-xST | Stand-Alone CAN Controller with SPI Interface, TSSOP-20 |
| U3 | ISO1050DUB | Isolated CAN Transceiver, SOP-8 |
| U4 | BQ76940DBT | Lithium battery monitor, 9-15 cells, integrated balancing, I2C interface, TSSOP-44 |
| U5 |
| DC Optocoupler, Vce 35V, CTR 50%, SMDIP-4 |
| C1,C4,C5,C7-C10,C18 | 100nF | Unpolarized capacitor |
|---|
| C2,C3 | 12pF | Unpolarized capacitor |
|---|
| C6,C11,Cf1-Cf3 | 10uF | Unpolarized capacitor |
|---|
| C12,C13 | 22pF | Unpolarized capacitor |
|---|
| C14-C17,C19-C23,C25-C30,CAP1-CAP3,Cx1-Cx3 | 1uF | Unpolarized capacitor |
|---|
| C24 | 4.7uF | Unpolarized capacitor |
|---|
| D1-D3,D8-D11,D22-D26,D32-D36 | LED | Light emitting diode |
|---|
| D4-D7,D16-D20,D27-D31 | BZT52B5V1 | Zener diode |
|---|
| D12 | BAS85 | Diode |
|---|
| D13-D15,D21 | 1N4148W | Diode |
|---|
| J1,J2 | Conn_01x05 | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J3 | Conn_02x03_Odd_Even | Generic connector, double row, 02x03, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J4 | Conn_01x08_Socket | Generic connector, single row, 01x08, script generated |
|---|
| J5 | Conn_01x07_Socket | Generic connector, single row, 01x07, script generated |
|---|
| J6 | Conn_01x06_Socket | Generic connector, single row, 01x06, script generated |
|---|
| R1,R13 | 10M | Resistor |
|---|
| R2,R4-R6,R19-R25,R31-R35,R41-R50,RBOOT1 | 10k | Resistor |
|---|
| R3,R7,R9 | 4.7k | Resistor |
|---|
| R8 | 120R | Resistor |
|---|
| R10-R12,R15-R18,R26-R30,R36-R40,RLED1-RLED14,Rx1-Rx3 | 1k | Resistor |
|---|
| R14 | 500k | Resistor |
|---|
| RBAL1-RBAL14 | 10R | Resistor |
|---|
| RBOOT2 | 100k | Resistor |
|---|
| Rf1-Rf3 | 100R | Resistor |
|---|
| SW1,SW2 | SW_Push | Push button switch, generic, two pins |
|---|
| TP1 | SDA | test point |
|---|
| TP2 | SCL | test point |
|---|
| Y1 | 20MHz | Two pin crystal |
|---|
| Y2 | 8MHz | Two pin crystal |
|---|