| U1 | LBUA5QJ2AB | Murata Type 2AB UWB module |
|---|
| U2 | XC9285B33CMR-G | 3.6V buck converter, SOT-23-5 |
|---|
| U3 | CP2104 | Single-Chip USB-to-UART Bridge, USB 2.0 Full-Speed, 2Mbps UART, QFN-24 |
|---|
| U4,U5 | IP4234CZ6 | ESD Protection, 2 channel, USB 2.0 to IEC 61000-4-2 level 4, 5.5V, SOT457 (SC-74-6) |
|---|
| ANT1 | Taoglas_UWC.20 | 3-5GHz & 6-9GHz Ultra-Wide Band (UWB) SMD Chip Antenna |
|---|
| C1,C3,C6,C9,C11,C12 | 100n | Unpolarized capacitor, small symbol |
|---|
| C2,C4,C7,C8 | 10u | Polarized capacitor, small symbol,Unpolarized capacitor, small symbol |
|---|
| C5,R1,R2,R7-R9,R13 | 0R | Resistor,Resistor, small symbol,Unpolarized capacitor, small symbol |
|---|
| C10 | 1u | Polarized capacitor, small symbol |
|---|
| D1,D2,D4,D5 | R | Light emitting diode, small symbol |
|---|
| D3,D6 | G | Light emitting diode, small symbol |
|---|
| J1 | Conn_I2C1 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J2 | Conn_I2C2 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J3 | Conn_01x03 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J4 | Conn_SPIS | Generic connector, single row, 01x07, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J5 | Conn_SPIM | Generic connector, single row, 01x07, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J6 | Conn_SWD | Generic connector, double row, 02x05, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J7 | Conn_GPIO | Generic connector, double row, 02x04, top/bottom pin numbering scheme (row 1: 1...pins_per_row, row2: pins_per_row+1 ... num_pins), script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J8 | Conn_Coaxial | coaxial connector (BNC, SMA, SMB, SMC, Cinch/RCA, LEMO, ...) |
|---|
| J9 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J10,J11 | USB_C_Receptacle_USB2.0_14P | USB 2.0-only 14P Type-C Receptacle connector |
|---|
| L1,L2 | L | Inductor |
|---|
| L3 | 2.2u | Inductor, small symbol |
|---|
| R3,R11 | 100k | Resistor, small symbol |
|---|
| R4,R5,R10,R15 | 3k3 | Resistor, small symbol |
|---|
| R6,R16 | 2k1 | Resistor, small symbol |
|---|
| R12 | 24k | Resistor, small symbol |
|---|
| R14 | 47k | Resistor, small symbol |
|---|
| R17,R18,R20,R21 | 5k1 | Resistor, small symbol |
|---|
| R19,R22 | 10k | Resistor, small symbol |
|---|
| SW1 | SW_Push | Push button switch, generic, two pins |
|---|
