Loading design…
Glaubinator
Radio Telescope System for 1 GHz to 2 GHz Operation
| Reference | Value | Description |
|---|---|---|
| Q1 | DMP4047LFDE-7 | P-MOSFET transistor, drain/source/gate |
| U1 | ZX60-P33ULN+ | |
| U2 | ADALM Pluto SDR | |
| U3,U4 | SKY13588-460LF | |
| U5 | SN74AVC2T244DQER | |
| U6 | MIC5365-1.8YC5-TR | |
| U7 |
| U13 | MAX8510EXK30T |
|---|
| U14 | TPS62133RGTR |
|---|
| U15,U16 | BPF-A1340+ | Bandpass Filter, 310 to 400 MHz, 50 Ohm, Mini-Circuits HQ1157 |
|---|
| U17 | BPF-A355 | Bandpass Filter, 310 to 400 MHz, 50 Ohm, Mini-Circuits HQ1157 |
|---|
| AE1 | Antenna_Shield | Antenna with extra pin for shielding |
|---|
| BT1 | Battery_Cell | Single-cell battery |
|---|
| C1-C5,C7 | 1 uF | Unpolarized capacitor, small symbol |
|---|
| C6 | 10 nf | Unpolarized capacitor, small symbol |
|---|
| C8 | 10 uF | Unpolarized capacitor, small symbol |
|---|
| C9 | 10uF | Unpolarized capacitor, small symbol |
|---|
| C10 | 0.1uF | Unpolarized capacitor, small symbol |
|---|
| C11 | 3.3nF | Unpolarized capacitor, small symbol |
|---|
| C12 | 22uF | Unpolarized capacitor, small symbol |
|---|
| D1 | SMBJ12A-13-F |
|---|
| F1 | Fuse | Fuse |
|---|
| F2 | RGEF300K-2 | Resettable fuse, polymeric positive temperature coefficient |
|---|
| F3 | 0ZCK0020FF2G |
|---|
| J1 | Screw_Terminal_01x04 | Generic screw terminal, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J2 | 9-12V From PoE Splitter | Generic screw terminal, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J3 | 3V Out For LNA | Generic screw terminal, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J4 | 5V Out For Filter Board | Generic screw terminal, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J5 | 5V From SDR | Generic screw terminal, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J6 | USB_B_MICRO |
|---|
| J7,J8 | USB_A | USB Type A connector |
|---|
| J9,J11,J15-J19 | ANT | coaxial connector (BNC, SMA, SMB, SMC, Cinch/RCA, LEMO, ...) |
|---|
| J10 | FILTER_OUT | coaxial connector (BNC, SMA, SMB, SMC, Cinch/RCA, LEMO, ...) |
|---|
| J12 | 3V In For LNA | Generic screw terminal, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| L2 | 2.2uH | Inductor |
|---|
| R1,R2 | 100k | Resistor,Resistor, small symbol |
|---|
| R3,R4 | 0 | Resistor, small symbol |
|---|
| TP1 | PROCTVIN | test point |
|---|
| TP2 | 5VBUCKVIN | test point |
|---|
| TP3 | G_PMOS | test point |
|---|
| TP4 | 5VBUCKVOUT | test point |
|---|
| TP5 | 3VLDOIN | test point |
|---|
| TP6 | 3VLDOOUT | test point |
|---|
| TP7 | 5VOUT | test point |
|---|
| TP8 | 5VUSB | test point |
|---|
| TP11 | GNDCLIP | test point |
|---|
| TP12 | FCTRL_VIN | test point |
|---|
| TP13 | FCTRL_1V8 | test point |
|---|
| TP14 | FCTRL_3V3 | test point |
|---|