GatorGrid-Mesh
George5683
This is the project for the senior design class
Components (19)
| Reference | Value | Description |
|---|---|---|
| Q3,Q4 | 2N3904 | 0.2A Ic, 40V Vce, Small Signal NPN Transistor, TO-92 |
| U1 | TP4056 | |
| A1 | A-RPICO-STA | Versatile and inexpensive microcontroller module powered by RP2040 dual-core Arm Cortex-M0+ processor up to 133 MHz, 264kB SRAM, 2MB QSPI flash; also supports Raspberry Pi Pico 2 |
| A2 | B-RPICO-AP | Versatile and inexpensive microcontroller module powered by RP2040 dual-core Arm Cortex-M0+ processor up to 133 MHz, 264kB SRAM, 2MB QSPI flash; also supports Raspberry Pi Pico 2 |
| C1,C2 | 100nF | Unpolarized capacitor |
| C3,C4 | 10uF | Unpolarized capacitor |
| D2 | POWER_LED | Light emitting diode |
| D3,D4 | LED | Light emitting diode |
| D5,D6 | SS34 | 40V 3A Schottky Diode, SMA |
| F1 | Polyfuse | Resettable fuse, polymeric positive temperature coefficient |
| J1 | Battery-Connector | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2-J5 | Conn_01x20_Pin | Generic connector, single row, 01x20, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J7 | Conn_01x03 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1 | 1.2k | Resistor |
| R2 | 470 | Resistor |
| R3,R8 | 1k | Resistor |
| R4,R5 | 10k | Resistor |
| R6,R7 | 1M | Resistor |
| SW1 | SW_SPST | Single Pole Single Throw (SPST) switch |