Loading design…
Game-Team-SLSC
The repo for firmware and hardware and docs of the 2026 Game Team's robot for CDFR Junior
| Reference | Value | Description |
|---|---|---|
| U1 | NRF24L01_Breakout | Ultra low power 2.4GHz RF Transceiver, Carrier PCB |
| U2 | TCA9548APWR | Low voltage 8-channel I2C switch with reset, TSSOP-24 |
| U3 | ESP32-S3-DevKitC | ESP32-S3-DevKitC |
| U4 | TCA9555PWR | 16-bit I/O expander, I2C and SMBus interface, interrupts, w/ pull-ups, TSSOP-24 package |
| U6 | R-78E3.3-1.0 | 1A Step-Down DC/DC-Regulator, 6-28V input, 3.3V fixed Output Voltage, LM78xx replacement, -40°C to +85°C, SIP3 |
| C1,C3,C5,C7,C13-C15,C17,C19,C21,C23,C25,C27,C29,C31,C33,C35,C37 | 10u | Polarized capacitor, small symbol,Unpolarized capacitor, small symbol |
| C2,C4,C6,C8,C16,C18,C20,C22,C24,C26,C28,C30,C32,C34,C36,C38 | 100n | Unpolarized capacitor, small symbol |
| D1 | 0805_Green | Light emitting diode |
| D2 | SS10P4 | Diode, anode on pins 2 and 3 |
| D3-D5,D12 | Yellow | Light emitting diode |
| F2 | 2A | Fuse |
|---|
| FB2,FB3 | BLM21PG331SN1D | Ferrite bead, small symbol |
|---|
| J1,J2,J7-J17 | MicroFit2x2 | Generic connector, double row, 02x02, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J3 | MicroFit2x12_Odd_Even | Generic connector, double row, 02x12, top/bottom pin numbering scheme (row 1: 1...pins_per_row, row2: pins_per_row+1 ... num_pins), script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J5 | MicroFit2x7 | Generic connector, double row, 02x07, top/bottom pin numbering scheme (row 1: 1...pins_per_row, row2: pins_per_row+1 ... num_pins), script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J6 | XT30 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J18 | Conn_02x07_Odd_Even | Generic connector, double row, 02x07, top/bottom pin numbering scheme (row 1: 1...pins_per_row, row2: pins_per_row+1 ... num_pins), script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| NT1-NT3,NT10-NT12 | Jumper_2_Bridged | Jumper, 2-pole, small symbol, bridged |
|---|
| R1,R2,R7,R8 | 4.7k | Resistor |
|---|
| R3-R5,R61 | R64.9 | Resistor |
|---|
| R6,R10-R14,R16,R18-R20,R22,R24,R26,R27 | 33R | Resistor, small symbol |
|---|
| R9,R15,R23,R25,R29,R31,R33,R35-R38,R43-R45,R50-R53 | 10k | Resistor,Resistor, small symbol |
|---|
| R17 | 1k | Resistor |
|---|
| SW1 | RotaryEncoder_Switch | Rotary encoder, dual channel, incremental quadrate outputs, with switch and MP Pin |
|---|
| TP1,TP2 | TestPoint | test point |
|---|