Loading design…
Faradworks
| Reference | Value | Description |
|---|---|---|
| U1 | ESP32-S3FN8 | |
| U2 | AP2112K-3.3 | 600mA low dropout linear regulator, with enable pin, 3.8V-6V input voltage range, 3.3V fixed positive output, SOT-23-5 |
| AT1 | 2450AT43B100E | |
| C1,C4,C5,C7-C10,C16,C17 | 1uF | Unpolarized capacitor |
| C2,C6,C11,C12,C15 | 0.1uF | Unpolarized capacitor |
| C3,C18,C19 | 22uF | Unpolarized capacitor |
| C13,C14 | 16pF | Unpolarized capacitor |
| D1 | LED | Light emitting diode |
| J1 | DX07S016JA1R1500 | |
| L1 | GZ2012D601TF | Inductor |
| L2 | 2.2nH | Inductor |
| R1 | 10k | Resistor |
| R2 | 1M | Resistor |
| R3 | 4.7K | Resistor |
| R4,R5 | 5.1K | |
| SW1 | RESET | Push button switch, generic, two pins |
| SW2 | BOOT | Push button switch, generic, two pins |
| Y1 | 40Mhz |