OBSPro
FabianSchwartau
Version of the OpenBikeSensor hardware optimized for PCBA
Components (52)
| Reference | Value | Description |
|---|---|---|
| Q1,Q2 | SI2302 | |
| Q3,Q4 | S8050 | |
| Q5,Q6 | BSS123 | |
| U1 | FM2113 | High precision battery protection IC |
| U2 | RT9069 | |
| U3 | LGS4056HEP | Charge IC |
| U4 | JW5026 | Current mode monolithic buck switching regulator |
| U5 | TLV61048 | 14-V Output Voltage Non-synchronos Boost Converter |
| U6 | CP2102N | |
| U7 | ESP32-WROOM-32 | |
| U8 | MAX-M10M | |
| U9,U10 | PGA460TPWR | |
| C1,C10,C14,C15,C17-C19,C21,C22,C24-C26,C28,C31-C33,C35 | 100n | |
| C2-C8,C11,C12,C16,L1,L2 | 10u | |
| C9,C13,C20 | 1u | |
| C23 | 10n | |
| C27,C34 | 390p | |
| C29,C36 | 100u | |
| C30,C37 | 1.5n | |
| D1,D5,D6 | D_Small | |
| D2,D3,D7 | LED | |
| D4 | B540C-13-F | |
| F1 | 1A | |
| FB1,FB2,R7 | 1k | |
| G1 | MKFS_Logo | |
| G2 | OBS_Logo | |
| H1-H4 | MountingHole | |
| J1 | LiPo | |
| J2 | USB | |
| J3 | On/Off | |
| J4 | MicroSD | |
| J5 | Display Cable | |
| J6 | U.FL GPS | 1 Inner pin IPEX Board-End 1.25mm 6GHz 50Ω 2mm SMD Coaxial Connectors (RF) ROHS |
| L3 | 27n | |
| LS1,LS2 | HY40A16T12-1 | |
| R1,R33,R34,R38,R39 | 100 | |
| R2,R11 | 1.24k | |
| R3,R4 | 5.1k | |
| R5,R6 | 1 | |
| R8,R9,R14,R20-R23,R30,R42 | 10k | |
| R10,R13 | 100k | |
| R12 | 3.9k | |
| R15 | 4.7k | |
| R16-R19,R24-R26 | 68 | |
| R27 | 150k | |
| R28 | 300k | |
| R29 | 62k | |
| R31,R32,R37 | 10 | |
| R36,R41 | 2.7k | |
| SW1 | BOOT | Push button switch, generic, two pins |
| T1,T2 | B78416A2232A003 | |
| TP1,TP2 | TestPoint |