drone_PCB
Ethansuttor
Components (29)
| Reference | Value | Description |
|---|---|---|
| U1 | AP2112K-3.3 | 600mA low dropout linear regulator, with enable pin, 3.8V-6V input voltage range, 3.3V fixed positive output, SOT-23-5 |
| U2 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U4 | STM32F405RGTx | STMicroelectronics Arm Cortex-M4 MCU, 1024KB flash, 192KB RAM, 168 MHz, 1.8-3.6V, 51 GPIO, LQFP64 |
| U5 | TPS5430DDAR | |
| U6 | ICM-42605 | |
| U7 | W25Q128JVE | 128Mbit / 16MiB Serial Flash Memory, Standard/Dual/Quad SPI, 2.7-3.6V, WSON-8 |
| C1-C4,C19 | 1uF | Unpolarized capacitor |
| C5 | 10uF | Unpolarized capacitor |
| C7 | .01uF | Unpolarized capacitor |
| C8 | 220uF | Polarized capacitor |
| C9,C18 | 10nF | Unpolarized capacitor |
| C10,C12,C13 | 2.2uF | Unpolarized capacitor |
| C11 | .1uF | Unpolarized capacitor |
| C20,C23-C27 | 100nF | Unpolarized capacitor |
| C21,C22 | 22pF | Unpolarized capacitor |
| C28 | 4.7uF | Unpolarized capacitor |
| CN1 | SM10B-SRSS-TB | |
| D2 | SS34 | 40V 3A Schottky Diode, SMA |
| D3,D4 | D_Schottky | Schottky diode |
| FB1 | 600ohms 100MHz | Ferrite bead |
| IMU-U2 | TLV73333PDBV | 300mA Capacitor-Free Low Dropout Voltage Regulator, Fixed Output 3.3V, SOT-23-5 |
| J2 | USB_C_Receptacle_USB2.0_14P | USB 2.0-only 14P Type-C Receptacle connector |
| J3 | Conn_01x04 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| L2 | 15uH | Inductor with iron core |
| R1,R2 | 5.1k | Resistor |
| R3,R4,R7,R9-R12 | 10k | Resistor |
| R8 | 3.24k | Resistor |
| SW1,SW2 | SW_Push | Push button switch, generic, two pins |
| Y1 | 8MHz | Four pin crystal, GND on pins 2 and 4 |