Loading design…
ElectronicCats
The Vulnerable Satellite Hacking Platform for Learning Through Research
| Reference | Value | Description |
|---|---|---|
| U2 | W25N02KVZEIR | 128Mbit / 16MiB Serial Flash Memory, Standard/Dual/Quad SPI, 2.7-3.6V, WSON-8 |
| U3 | EA3059 | 4-channel power management IC, 2.7..5.5V input, 1.5 MHz switching frequency, VQFN-24 |
| U5 | FSUSB30MUX | Low-Power, Two-Port, High-Speed, USB2.0 (480Mbps) Switch, MSOP-10 |
| U6 | MT3608 | High Efficiency 1.2MHz 2A Step Up Converter, 2-24V Vin, 28V Vout, 4A current limit, 1.2MHz, SOT23-6 |
| U7 | AP2114H-3.3 | 600mA low dropout linear regulator, with enable pin, 3.8V-6V input voltage range, 3.3V fixed positive output, SOT-23-5 |
| U8 | SL2.1A | |
| C1,C3,C8,C11,C16,C23,C25,C28,C29,C55,C56 | 10uF | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C2,C6,C7,C14,C15,C18,C24,C26,C30,C35-C37 | 100nF | Unpolarized capacitor,Unpolarized capacitor, small symbol |
| C4,C5,C9,C10,C12,C13,C17 | 1uF | Unpolarized capacitor, small symbol |
| C19-C22 | 18pF | Unpolarized capacitor, small symbol |
| C27 | 1nF | Unpolarized capacitor, small symbol |
| C31,C33,C39,C41 | 220pf | Unpolarized capacitor |
| C32,C34,C40,C42,C50,C51 | 22uF | Unpolarized capacitor |
| C38,C43-C45 | 47uF | Unpolarized capacitor, small symbol |
| C46 | 220uF | Unpolarized capacitor |
| C52,C57 | 100uF | Unpolarized capacitor |
| C53,C54 | 4.7uF | Unpolarized capacitor |
| D1 | LED | Light emitting diode |
| D5-D7 | SS34 | 20V 1A Schottky Barrier Rectifier Diode, DO-41,Diode |
| F2,F3 | 2A | |
| FB1,FB2 | 120R@100M | Ferrite bead, small symbol |
| J2 | Conn_01x04_Pin | Generic connector, single row, 01x04, script generated |
| J3 | Sensors | Generic connector, double row, 02x20, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4,J5 | USB_A | USB Type A connector |
| J6 | Source | Generic connector, double row, 02x05, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1-L4 | 1.5uH | Inductor with ferrite core |
| L5 | 4.7uH | Inductor |
| R1,R4,R11 | 100 | Resistor, small symbol |
| R2 | 240R | Resistor, small symbol |
| R3,R7,R9,R12,R13 | 10K | Resistor, small symbol |
| R5 | 1M | Resistor, small symbol |
| R6,R8 | 22 | Resistor, small symbol |
| R10,R17-R19,R21,R23-R25 | 100K | Resistor,Resistor, small symbol |
| R14 | 510K | Resistor |
| R15,R20,R22 | 200K | Resistor |
| R16,R36 | 110K | Resistor |
| R26,R27 | 4.7K | Resistor |
| R37 | 15K | Resistor |
| SW1,SW2 | SW_Push | Push button switch, generic, two pins |
| SW4 | USB Selector | |
| Y1 | Crystal | Two pin crystal |
| Y2 | 24MHz | Four pin crystal, GND on pins 2 and 4, small symbol |
| Y3 | Crystal_GND2 | Three pin crystal, GND on pin 2 |