DMH-Slew-Mk2
DeMarco
Second version of my Voltage Controlled Slew Limiter in Kosmo format.
Components (38)
| Reference | Value | Description |
|---|---|---|
| Q1,Q2,Q5-Q8,Q11,Q12 | BC548 | 0.1A Ic, 30V Vce, Small Signal NPN Transistor, TO-92 |
| Q3,Q4,Q9,Q10 | BC558 | 0.1A Ic, 30V Vce, PNP Small Signal Transistor, TO-92 |
| U1-U4 | TL074 | Quad Low-Noise JFET-Input Operational Amplifiers, DIP-14/SOIC-14 |
| U10 | LM4040LP-10 | 10.00V Precision Micropower Shunt Voltage Reference, TO-92 |
| C1,C2 | 47uF | Polarized capacitor |
| C3-C5,C10,C11,C23-C26 | 100nF | Unpolarized capacitor |
| C6-C8,C17,C21,C22 | 10pF | Unpolarized capacitor |
| C9,C20 | 2.2nF | Unpolarized capacitor |
| C12,C27 | 1uF | Unpolarized capacitor |
| C13,C15,C18,C28 | 220nF | Unpolarized capacitor |
| C14,C19 | 22nF | Unpolarized capacitor |
| D1,D2,D7,D8 | 1N4148 | 100V 0.15A standard switching diode, DO-35 |
| D3,D4 | SB140 | 40V 1A Schottky Barrier Rectifier Diode, DO-41 |
| D5 | LED_A_Y | Light emitting diode |
| D6 | LED_A_R | Light emitting diode |
| D9 | LED_B_Y | Light emitting diode |
| D10 | LED_B_R | Light emitting diode |
| J1-J10 | TS_Jack_6.35mm_Sw | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling), 6.35mm, 1/4inch |
| J11,J13,J14,J16,J21,J23,J24,J26 | Conn_02x03_Top_Bottom | Generic connector, double row, 02x03, top/bottom pin numbering scheme (row 1: 1...pins_per_row, row2: pins_per_row+1 ... num_pins), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J12,J15,J22,J25 | Conn_02x06_Top_Bottom | Generic connector, double row, 02x06, top/bottom pin numbering scheme (row 1: 1...pins_per_row, row2: pins_per_row+1 ... num_pins), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J17-J20,J27-J30 | Conn_01x08 | Generic connector, single row, 01x08, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J100 | IDC_02x08 | IDC jack, 2x8 pins, row a carries same signals as row b. |
| J200 | IDC_02x05 | IDC jack, 2x5 pins, row a carries same signals as row b. |
| JP1-JP3 | Jumper_3_Bridged12 | Jumper, 3-pole, pins 1+2 closed/bridged |
| R1,R14,R26,R35,R36,R47,R61,R62,R72,R79 | 1k | Resistor, US symbol |
| R2,R5-R13,R16,R22,R23,R33,R34,R42-R44,R46,R48,R50-R52,R54,R56,R57,R63,R64,R74,R82,RV1,RV3,RV4 | 100k | Dual potentiometer, separate units,Potentiometer, US symbol,Resistor, US symbol |
| R3,R4,R41,R53 | 56k | Resistor, US symbol |
| R15,R65 | 82k | Resistor, US symbol |
| R17,R28-R30,R39,R40,R66,R69,R73,R76,R77,R80 | 10k | Resistor, US symbol |
| R18-R21,R59,R60,R67,R68 | 1k8 | Resistor, US symbol |
| R24,R25,R55,R58 | 220k | Resistor, US symbol |
| R27,R75 | 100R | Resistor, US symbol |
| R31,R32,R71,R81 | 4M7 | Resistor, US symbol |
| R37,R38,R70,R78 | 3k3 | Resistor, US symbol |
| R49 | 470R | Resistor, US symbol |
| SW1,SW4 | SW_DPDT_3way | DPDT switch, can be ON-ON or ON-OFF-ON |
| SW2,SW5 | SW_DPDT | DPDT switch, can be ON-ON or ON-OFF-ON |
| SW3,SW6 | SPDT_OnOffOn | Switch, single pole double throw |