UNSW_Rocketry_Senior_Flight_Computer
DashiellRussell
Components (49)
| Reference | Value | Description |
|---|---|---|
| IC1 | E22-900M22S | SX1262 868/915MHz SPI SMD LoRa Module |
| Q1 | DMP3017SFG-7 | P-MOSFET transistor, gate/source/drain |
| U1 | ESP32-S3-MINI-1U | RF Module, ESP32-S3 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 3.3V, SMD, external antenna |
| U2 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U3 | MAX-M10S | GNSS Module MAX M10, VCC 1.65V to 3.6V |
| U4,U6 | TPS630701RNMR | TPS630701 buck-boost, fixed 5V, 2-16V in, RNM package |
| U5 | TPS630702RNMR | TPS630702 buck-boost, fixed 3.3V, 2-16V in, RNM package |
| U7 | LTC4412xS6 | Low Loss PowerPath Controller, TSOT-23-6 |
| U8 | INA226 | High-Side or Low-Side Measurement, Bi-Directional Current and Power Monitor (0-36V) with I2C Compatible Interface, TSSOP-10 (Texas DGS0010A / VSSOP) |
| U9-U12 | TMP1075DGK | I2C-bus digital temperature sensor and thermal watchdog, VSSOP-8 |
| U13 | SN65HVD230 | CAN Bus Transceivers, 3.3V, 1Mbps, Low-Power capabilities, SOIC-8 |
| BOOT1,RESET1 | SMD_4.6x2.8mm_h1.9mm | Single Pole Single Throw (SPST) switch |
| C1,C2,C4,C8-C10,C16,C17,C24,C30-C32,C34-C38 | 100nF | Unpolarized capacitor |
| C3,C6 | 22uF | Unpolarized capacitor |
| C5,C7,C33 | 10uF | Unpolarized capacitor |
| C11 | 100pF | Unpolarized capacitor |
| C12-C15,C22,C23 | 10uF 25V | Unpolarized capacitor |
| C18-C21,C25,C26,C28,C29 | 47uF 16V | Unpolarized capacitor |
| C27 | C_Polarized | Polarized capacitor |
| D1,D2,D5 | Green | Light emitting diode |
| D3,D4,D7 | Yellow | Light emitting diode |
| D6 | B5819W | Schottky diode, small symbol |
| D8 | WS2812B-2020 | RGB LED with integrated controller, 2.0 x 2.0 mm, 12 mA |
| F1 | 3A | Resettable fuse, polymeric positive temperature coefficient |
| F2 | 500mA | Resettable fuse, polymeric positive temperature coefficient |
| J1 | ESP U.FL Jumper | small coaxial connector (BNC, SMA, SMB, SMC, Cinch/RCA, LEMO, ...) |
| J2 | ESP SMA | coaxial connector (BNC, SMA, SMB, SMC, Cinch/RCA, LEMO, ...) |
| J3 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J4 | LoRa U.FL Jumper | small coaxial connector (BNC, SMA, SMB, SMC, Cinch/RCA, LEMO, ...) |
| J5 | LoRa SMA | coaxial connector (BNC, SMA, SMB, SMC, Cinch/RCA, LEMO, ...) |
| J6 | GPS SMA | coaxial connector (BNC, SMA, SMB, SMC, Cinch/RCA, LEMO, ...) |
| J7 | J_BATT | Generic screw terminal, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J8 | Micro_SD_Card | Micro SD Card Socket |
| J9,J12 | JST_Locking_4 | Locking 4 pin JST SMD connector |
| J10,J11,J13 | JST_Locking_3 | Locking 3 pin JST 1.25mm connector |
| L1 | 27nH | Inductor |
| L2-L4 | 1.5 µH | Inductor |
| R1,R2,R7 | 10K | Resistor |
| R3,R4 | 4.7k | Resistor |
| R5,R6 | 5.1k | Resistor |
| R8-R12,R14 | 1k | Resistor |
| R13 | 20mΩ | Resistor |
| R15,R25,R26 | 100k | Resistor |
| R16 | 27k | Resistor |
| R17-R24 | 10k | Resistor |
| R27,R28 | 120R | Resistor |
| SW1 | BTN1 | Push button switch, generic, two pins |
| SW2 | BTN2 | Push button switch, generic, two pins |
| SW3 | BTN3 | Push button switch, generic, two pins |