Loading design…
Cyberspecies
| Reference | Value | Description |
|---|---|---|
| Q1,Q2 | BSS138 | 50V Vds, 0.22A Id, N-Channel MOSFET, SOT-23 |
| U1 | ICM-20948 | InvenSense 9-Axis Motion Sensor, Accelerometer, Gyroscope, Compass, I2C/SPI, QFN-24 |
| U2 | BME280 | 3-in-1 sensor, humidity, pressure, temperature, I2C and SPI interface, 1.71-3.6V, LGA-8 |
| U3 | AP7366-33W5-7 | |
| U4 | AP7366-W5-7 | |
| U5 | FFC [G] | |
| U6 |
| U7 | FFC [K] |
|---|
| U8 | NEO-M8M | GNSS Module NEO M8, VCC 2.7V to 3.6V |
|---|
| U9 | SRV05-4 | ESD Protection Diodes with Low Clamping Voltage, SOT-23-6 |
|---|
| BootSW1 | SW_Push | Push button switch, generic, two pins |
|---|
| C1-C3,C8,C17 | 0.1uF | Unpolarized capacitor |
|---|
| C4,C5 | 100nF | Unpolarized capacitor |
|---|
| C6,C10,C11,C13,C14 | 1uF | Unpolarized capacitor |
|---|
| C7,C16 | 22uF | Unpolarized capacitor |
|---|
| C9,C12,C15 | 10uF | Unpolarized capacitor |
|---|
| D1 | WL-SMCW_0603 |
|---|
| ESP1 | ESP32-S3-WROOM-1 | 2.4 GHz WiFi (802.11 b/g/n) and Bluetooth ® 5 (LE) module Built around ESP32S3 series of SoCs, Xtensa ® dualcore 32bit LX7 microprocessor Flash up to 16 MB, PSRAM up to 8 MB 36 GPIOs, rich set of peripherals Onboard PCB antenna |
|---|
| J1 | 10171746-00021LF |
|---|
| J2 | JST [C] | Generic connector, single row, 01x04, script generated |
|---|
| J3 | MSD-1-A |
|---|
| J4 | JST [N] | Generic connector, single row, 01x03, script generated |
|---|
| J5 | U.FL-R-SMT-1_10_ | U.FL Series 6 Ghz 50 Ohm Ultra-small SMT Coaxial Cable Receptacle |
|---|
| J6,J7 | Pogo JST | Generic connector, single row, 01x02, script generated,Generic connector, single row, 01x04, script generated |
|---|
| L1 | MPZ1608S601ATA00 |
|---|
| L2 | LQG15HS27NJ02 | Inductor |
|---|
| R1,R2,R7-R10,R14,R15 | 10K | Resistor |
|---|
| R3,R4 | 5.1K | Resistor |
|---|
| R5 | 75K | Resistor |
|---|
| R6 | 60K | Resistor |
|---|
| R11 | 10 | Resistor |
|---|
| R12 | 65 | Resistor |
|---|