KiCAD-Projects
CooperW824
A place for me to store my KiCAD Projects
Components (43)
| Reference | Value | Description |
|---|---|---|
| Q1 | S8550 | 0.7A Ic, 20V Vce, Low Voltage High Current PNP Transistor, TO-92 |
| Q2-Q5,Q7 | IRLZ44N | 47A Id, 55V Vds, 22mOhm Rds Single N-Channel HEXFET Power MOSFET, TO-220AB |
| U1 | LMR33630ADDA | Simple Switcher Synchronous Buck Regulator, Vin=3.8-36V, Iout=3A, F=400kHz, Adjustable output voltage, HSOP-8 |
| U2 | ATmega2560-16A | 16MHz, 256kB Flash, 8kB SRAM, 4kB EEPROM, JTAG, TQFP-100 |
| U9 | HX711 | 24-Bit Analog-to-Digital Converter (ADC) for Weight Scales |
| U10-U13 | AD8495 | Precision Thermocouple Amplifiers with Cold Junction Compensation, K-Type Thermocouple, 0 to 50C, MSOP-8 |
| U14 | FT231XQ | Full Speed USB to Full Handshake UART, QFN-20 |
| U15,U16 | MAX485E | Half duplex RS-485/RS-422, 2.5 Mbps, ±15kV electro-static discharge (ESD) protection, no slew-rate, no low-power shutdown, with receiver/driver enable, 32 receiver drive capability, DIP-8 and SOIC-8 |
| USB0 | USB_C_Plug_USB2.0 | USB 2.0-only Type-C Plug connector |
| C1,C18 | 10uF | Unpolarized capacitor,capacitor, US symbol |
| C2 | 220nF | Unpolarized capacitor |
| C3,C17,C20,C23,C24,C26,C30-C32 | 0.1uF | Unpolarized capacitor,capacitor, US symbol |
| C4-C7 | 22uF | Unpolarized capacitor |
| C8 | 1uF | Unpolarized capacitor |
| C9-C12,C15,C16,C29 | 100nF | Unpolarized capacitor |
| C13,C14 | 22pF | Unpolarized capacitor |
| C19,C21,C22,C25 | 0.2uF | Unpolarized capacitor |
| C27,C28 | 47pF | Unpolarized capacitor |
| D1,D8-D14 | LED | Light emitting diode |
| D2-D7 | SS34 | 40V 3A Schottky Diode, SMA |
| E0,E1 | VDC | Generic screw terminal, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| JP1 | RESET_ENABLE | Jumper, 2-pole, open |
| L1 | 8uH | Inductor |
| L2 | 10uH | Inductor |
| LC0 | Load Cell | Generic screw terminal, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
| P0-P5 | Pressure Transducer | Generic screw terminal, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1,R2 | 100K | Resistor |
| R3 | 24.9K | Resistor |
| R4,R6,R8,R14,R16,R18,R20,R24,R28,R29 | 10K | Resistor |
| R5,R13,R15,R17,R19,R23,R26,R27 | 220 | Resistor |
| R7 | 24K | Resistor |
| R9-R12 | 1M | Resistor |
| R21 | 5.1K | Resistor |
| R22,R25 | 27 | Resistor |
| R30,R31 | 120 | Resistor |
| R32-R35 | 1K | Resistor |
| RX1 | COPI | Generic screw terminal, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| SW1 | RESET | Push button switch, generic, two pins |
| TC0-TC3 | Thermocouple | Thermocouple |
| TX1 | CIPO | Generic screw terminal, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| V0-V4 | L | Inductor |
| V5 | SABV | Servo Motor (Futaba, HiTec, JR connector) |
| Y1 | ABM8-16.000MHZ-B2-T | Four pin crystal, GND on pins 2 and 4 |