PCB-design-in-KiCad9.0
Constellation-destroyer
KiCad PCB designs from my IoT Research Internship includes analog circuits, IoT sensor boards, and multi-sensor health monitoring system.
Components (16)
| Reference | Value | Description |
|---|---|---|
| U1 | CH340G | USB serial converter, UART, SOIC-16 |
| U2 | AT89x51xxP | 8-bit Microcontroller with 4K Bytes Flash, DIP-40 |
| C1,C2 | 22uF | Unpolarized capacitor |
| C3,C4 | 10uF | Unpolarized capacitor |
| C4,C5 | 100nF,22pF | Unpolarized capacitor |
| C6 | 100nF | Unpolarized capacitor |
| D1 | LED | Light emitting diode |
| D2 | LL4148 | 100V 0.15A standard switching diode, MiniMELF |
| J1 | Conn_01x06_Pin | Generic connector, single row, 01x06, script generated |
| J2 | Conn_01x06_Pin,USB | Generic connector, single row, 01x05, script generated,Generic connector, single row, 01x06, script generated |
| R1 | 10k | Resistor |
| R2 | 1.5k,1k5 | Resistor |
| R3,R4 | 1k5 | Resistor |
| SW1 | SW_Push | Push button switch, generic, two pins |
| Y1 | 12MHz | Two pin crystal |
| Y2 | Crystal | Two pin crystal |