ColorAudio
Coloryr
Components (70)
| Reference | Value | Description |
|---|---|---|
| Q1 | NPN | Bipolar transistor symbol for simulation only, substrate tied to the emitter |
| Q2 | PMOS | P-MOSFET transistor, drain/source/gate |
| U1 | SOM3562_18 | |
| U2 | TLV6213x | |
| U4 | BQ25895RTW | Controlled Single Cell 5A Fast Charger with MaxCharge, WQFN-24 |
| U5 | LM27762 | Low-noise inverting charge pump with both positive and negative LDO's, with 2.7V-5.5V input to +1.5 to +5V and -1.5 to -5V Output Voltage, WSON-12 |
| U6 | LP5907MFX-3.3 | 250-mA Ultra-Low-Noise Low-IQ LDO, 3.3V, SOT-23 |
| U7 | TPS61230DRC | High Efficiency Synchronous Step Up Converters with 5-A Switches, 2.3-5.5V Input Voltage, VSON-10 |
| U8 | TCKE812 | |
| U9 | CH334R | USB HUB controller, UART, QSOP-16 |
| U10 | STI9287 | |
| U11,U12 | TXS0102DCU | 2-Bit Bidirectional Voltage-Level Shifter for Open-Drain and Push-Pull Application, VSSOP-8 |
| U13 | AIC8800 | |
| U14,U15 | CS43198 | |
| U16 | OPA1622 | High-Fidelity, Bipolar-Input, Audio Operational Amplifier, VSON-10 |
| U17 | CH422E | |
| USB1 | USB_C_Plug_USB2.0 | USB 2.0-only Type-C Plug connector |
| USB2 | USB_A | USB Type A connector |
| C1-C3,C7,C8,C23,C25-C27,C32 | 22uF | Unpolarized capacitor |
| C4,C5,C10,C12-C14,C18-C20,C28,C47,C56,C70,C79,C83 | 10uF | Unpolarized capacitor |
| C6,C29,C37-C43,C45,C46,C50,C51,C55,C64,C65,C69,C85,C86 | 0.1uF | Unpolarized capacitor |
| C9,C11,C15,C21,C22,C30,C33-C36,C84 | 1uF | Unpolarized capacitor |
| C16 | 47nF | Unpolarized capacitor |
| C17,C44 | 4.7uF | Unpolarized capacitor |
| C24 | 10nF | Unpolarized capacitor |
| C31 | 120pF | Unpolarized capacitor |
| C48,C49 | 10pF | Unpolarized capacitor |
| C52-C54,C59-C63,C66-C68,C73-C77 | 2.2uF | Unpolarized capacitor |
| C57,C58,C71,C72 | 15uF | Unpolarized capacitor |
| C78,C82 | 1.0uF | Unpolarized capacitor |
| C80,C81 | 4.7nf | Unpolarized capacitor |
| D1,D4,D5,D16 | D | Diode |
| D2,D3,D8-D15 | ESD9B5.0ST5G | ESD protection diode, 5.0Vrwm, SOD-923 |
| D6,D7 | LED | Light emitting diode |
| J1,J3,J4,J9,J10 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J2 | Conn_01x03 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5-J8,J11,J14 | TestPoint | Generic connector, single row, 01x01, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J12 | Conn_01x04 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J13 | Conn_01x05 | Generic connector, single row, 01x05, script generated (kicad-library-utils/schlib/autogen/connector/) |
| L1,L2 | 2,2uH | Inductor |
| L3 | 1.0uH | Inductor |
| L4 | 10uH | Inductor |
| R1,R58-R60,R63,R64,R73-R79,R85-R87,R89-R91 | 0 | Resistor |
| R2,R12,R16-R19,R22,R26,R27,R47,R57,R80,R88 | 10K | Resistor |
| R3,R4,R6,R51 | 100 | Resistor |
| R5,R28-R43,R81-R84 | 4.7K | Resistor |
| R7,R8 | 2.2R | Resistor |
| R9,R25,R44,R52 | 100K | Resistor |
| R10 | 750K | Resistor |
| R11 | 240K | Resistor |
| R13 | 549K | Resistor |
| R14 | 511K | Resistor |
| R15 | 260 | Resistor |
| R20 | 100K/NC | Resistor |
| R21,R46 | 1K | Resistor |
| R23,R48 | 12K | Resistor |
| R24 | 390K | Resistor |
| R45 | 10 | Resistor |
| R49 | 5.1K | Resistor |
| R50 | 3K | Resistor |
| R53 | 150K | Resistor |
| R54-R56 | 3.3K | Resistor |
| R61,R62,R65,R66 | 50 | Resistor |
| R67,R69 | 510 | Resistor |
| R68,R70 | 71.5 | Resistor |
| R71,R72 | 82 | Resistor |
| RV1,RV2 | R_Potentiometer | Potentiometer |
| TF1 | Micro_SD_Card_Det1 | Micro SD Card Socket with one card detection pin |
| Y1 | 12M | HCMOS Crystal Clock Oscillator, 2.5x2.0 mm SMD |
| Y2 | 24.576M | HCMOS Crystal Clock Oscillator, 2.5x2.0 mm SMD |