Loading design…
CircuitGuy943
(🚧) A filament dryer to precede my old one made inside a wooden box that never worked properly and didn't heat anything. Features to be estabilished
| Reference | Value | Description |
|---|---|---|
| Q1,Q2 | IPD33CN10N G | |
| U1 | RP2040-ZERO | |
| U2 | HS96L03W2C03 | |
| U3 | XT60PW-F_C428722 | |
| U4 | K7805-500R3_C909662 | |
| U5 | DRV8825PWPR | |
| U6 |
| RVT1E101M0607 100UF 25V |
| C1 | 0.01uF | Unpolarized capacitor |
|---|
| C2-C4 | 0.1uF | Unpolarized capacitor |
|---|
| C5 | 0.47uF | Unpolarized capacitor |
|---|
| J1 | Heater - | Generic connector, single row, 01x01, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J2 | Heater + | Generic connector, single row, 01x01, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J3 | Fan + | Generic connector, single row, 01x01, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J4 | Fan - | Generic connector, single row, 01x01, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J5 | Stepper | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J6 | SHT40 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| J7 | IR sensor | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| R1,R2 | 100 | Resistor |
|---|
| R3-R8,R15-R17 | 10K | Resistor |
|---|
| R9 | 1M | Resistor |
|---|
| R10,R11 | 0.2 | Resistor |
|---|
| R12 | 2.2K | Resistor |
|---|
| R13 | 4.7K | Resistor |
|---|
| SW1-SW3 | SW_Push | Push button switch, generic, two pins |
|---|
| SW9 | EC11E09244BS |
|---|