calsol-hw-libs
CalSol
Shared HW libraries
Components (26)
| Reference | Value | Description |
|---|---|---|
| Q1,Q2 | NPN | Bipolar transistor symbol for simulation only, substrate tied to the emitter |
| U1 | ESP32-S3-WROOM-1 | RF Module, ESP32-S3 SoC, Wi-Fi 802.11b/g/n, Bluetooth, BLE, 32-bit, 3.3V, onboard antenna, SMD |
| U2 | TPD4S012DRYR | Quad 0.8-pF, 5.5-V, ±10-kV ESD protection diode with 15-V tolerant Vbus for USB Interface< |
| U4,U5 | LTC4151xMS | |
| U6 | TCAN332 | High-Speed CAN Transceiver, 1Mbps, 3.3V supply, SOT-23-8/SOIC-8 |
| U7 | CP2102N-Axx-xQFN24 | USB to UART master bridge, QFN-24 |
| C1,C8 | 100uF | Unpolarized capacitor |
| C2,C4,C5,C7 | 0.1uF | Unpolarized capacitor |
| C3,C6 | 10uF | Unpolarized capacitor |
| C9 | 1uF | Unpolarized capacitor |
| D1 | PESD1CAN | 50V Clamp 3A (8/20µs) Ipp Tvs Diode Surface Mount SOT-323 |
| D2,D4 | D | |
| D3 | SMAJ26CA | |
| D5 | WS2812B | |
| D6-D8 | LED | Light emitting diode |
| J1,J4 | Conn_01x22_Pin | Generic connector, single row, 01x22, script generated |
| J2 | Conn_01x05_Socket | |
| J3 | USB_C_Receptacle_USB2.0_14P | USB 2.0-only 14P Type-C Receptacle connector |
| R1,R2 | 5.1k | |
| R3 | 10 | Resistor |
| R4,R5,R10,R11 | 10k | Resistor |
| R6 | 1k | |
| R7,R9 | 0.02 | |
| R8 | 1K | |
| R12,R13 | 220 | Resistor |
| SW1,SW3 | SW_Push | Push button switch, generic, two pins |