Broccoli-board
Broccoliux
A fully custom 100% mechanical keyboard with a custom black PCB, hot-swap clicky switches, and full RGB where every internal component is hand soldered and nothing is by assemble.
Components (20)
| Reference | Value | Description |
|---|---|---|
| U1 | nice!nano | |
| U2 | 74AHCT125 | Quadruple Bus Buffer Gates With 3-State Outputs |
| U3 | MCP73831 | Single cell, Li-Ion/Li-Po charge management controller, 4.20V, Tri-State Status Output, in DFN-8 package |
| U4 | ME6211-3.3V | 300mA low dropout linear regulator, shutdown pin, 6.5V max input voltage, 1.0V fixed positive output, SOT-23-5 |
| BTN1 | RESET | Push button switch, generic, two pins |
| C1-C3,C17,C18 | 100nF | Unpolarized capacitor |
| C12,C16 | 100nf | Unpolarized capacitor |
| C_RF1 | 10uF | Polarized capacitor |
| D1-D84 | 1N4148W | Diode, small symbol |
| D_ESD1 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| ENC1 | EC11 | Rotary encoder, dual channel, incremental quadrate outputs, with switch |
| F1 | 500mA | Fuse |
| J1 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J2 | Battery_JST_PH2 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |