Loading design…
Architeuthis-Flux
a breadboard you can stick things to
| Reference | Value | Description |
|---|---|---|
| U1,U2 | LM324 | Low-Power, Quad-Operational Amplifiers, DIP-14/SOIC-14/SSOP-14 |
| U3 | NCP1117-3.3_SOT223 | |
| U5,U12 | QA503C | |
| U6 | AK4619VN | |
| U8 | W25Q128JVS | |
| U9 | RP2040 | |
| U13-U15 | CH446X | |
| C1,C2 | 10u |
| C3-C5,C9-C12 | 1u |
|---|
| C6,C7,C14-C17 | 27p |
|---|
| C8,C13 | 10uF |
|---|
| C18-C20,C23,C25 | 0.1uF |
|---|
| C21,C22 | 2.2uF |
|---|
| J1 | USB_B_Mini |
|---|
| J2 | Debug |
|---|
| J3 | Power | Generic connector, single row, 01x05, script generated |
|---|
| J5 | I2C_OLED_Display | Generic connector, single row, 01x04, script generated |
|---|
| J6,J7 | Conn_02x35_JumperluxCardEdge |
|---|
| JP1,JP6 | Power_From_Breadboard | Jumper, 2-pole, open |
|---|
| JP2-JP5 | SolderJumper_3_Bridged12 | 3-pole Solder Jumper, pins 1+2 closed/bridged |
|---|
| JP7 | SolderJumper_2_Bridged | Solder Jumper, 2-pole, closed/bridged |
|---|
| R1,R2 | 22R |
|---|
| R3,R9,R19,R21-R26 | 22K | Resistor, small US symbol |
|---|
| R4,R7 | 1k |
|---|
| R5,R8,R18,R20,R29,R31,R33,R37 | 47K | Resistor, small US symbol |
|---|
| R6,R30,R32,R34,R38 | 10K | Resistor, small US symbol |
|---|
| R10,R12,R14,R16 | 270K |
|---|
| R11,R13,R15,R17 | 39K |
|---|
| R27,R35,R36,R39-R42 | 2.2K | Resistor, small US symbol |
|---|
| R28 | 0R |
|---|
| SW1 | USB BOOT |
|---|
| TP1 | AOUT2R | test point |
|---|
| TP2 | AOUT2L | test point |
|---|
| TP3 | AOUT1R | test point |
|---|
| TP4 | AOUT1L | test point |
|---|
| TP5 | Y3_A | test point |
|---|
| TP6 | Select_Probe | test point |
|---|
| TP7 | Button_Probe | test point |
|---|
| TP10 | Y0_A | test point |
|---|
| TP11 | Y0_B | test point |
|---|
| TP12 | Y0_C | test point |
|---|
| TP13 | Voltage_Probe | test point |
|---|
| TP14 | Y3_B | test point |
|---|
| TP15 | Y3_C | test point |
|---|
| TP16 | GPIO_2 | test point |
|---|
| TP20 | LED_OUT | test point |
|---|
| TP21 | LED_IN | test point |
|---|
| Y1 | ABLS-12.000MHZ-B4-T |
|---|