PicoCAN
AdrianR3
RP2040 based dev board w/built-in CAN controller and transceiver
Components (24)
| Reference | Value | Description |
|---|---|---|
| U1 | RP2040 | A microcontroller by Raspberry Pi |
| U2 | MCP1700x-330xxTT | 250mA Low Quiscent Current LDO, 3.3V output, SOT-23 |
| U3 | W25Q16JVUXIQ | 128Mbit / 16MiB Serial Flash Memory, Standard/Dual/Quad SPI, 2.7-3.6V, SOIC-8 |
| U4 | MCP25625x-x-ML | Stand-Alone CAN Controller with SPI Interface and integated Transceiver, VQFN-28 |
| C1,C10 | 1 µF | Unpolarized capacitor |
| C2-C9,C11,C12,C17,C20-C22 | 100 nF | Unpolarized capacitor |
| C13,C14 | 10 µF | Unpolarized capacitor |
| C15,C16 | 33 pF | Unpolarized capacitor |
| C18,C19 | 8 pF | Unpolarized capacitor |
| D1 | C2286 | Light emitting diode |
| D2 | C2994781 | Light emitting diode |
| D3,D4 | MBR120VLSFT1G | Schottky diode |
| J1 | USB_C_Receptacle_USB2.0_14P | USB 2.0-only 14P Type-C Receptacle connector |
| J5 | Screw_Terminal_01x03 (C3817776) | Generic screw terminal, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1,R2 | 5.1K | Resistor |
| R3,R4 | 27R | Resistor |
| R5,R7 | 1K | Resistor |
| R6,R11,R12 | 10K | Resistor |
| R8 | 470R | Resistor |
| R9 | 100R | Resistor |
| R10 | 120R | Resistor |
| SW1 | SW_Push | Push button switch, generic, two pins |
| Y1 | 12 MHz Crystal_GND24 (C9002) | Four pin crystal, GND on pins 2 and 4 |
| Y2 | 16 MHz Crystal_GND24 (C13738) | Four pin crystal, GND on pins 2 and 4 |