STM32-Custom-PCB
Adityasc9
Hardware design files for a custom STM32 development board created in KiCad.
Components (21)
| Reference | Value | Description |
|---|---|---|
| U1 | STM32F103C8T6 | STMicroelectronics Arm Cortex-M3 MCU, 64KB flash, 20KB RAM, 72 MHz, 2.0-3.6V, 37 GPIO, LQFP48 |
| U2 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| U3 | USBLC6-2SC6 | Very low capacitance ESD protection diode, 2 data-line, SOT-23-6 |
| U4 | BME280 | 3-in-1 sensor, humidity, pressure, temperature, I2C and SPI interface, 1.71-3.6V, LGA-8 |
| C1-C4,C9 | 100n | Unpolarized capacitor |
| C5 | 10u | Unpolarized capacitor |
| C6 | 10n | Unpolarized capacitor |
| C7,C8 | 1u | Unpolarized capacitor |
| C10,C11 | 10p | Unpolarized capacitor |
| C12,C13 | 22u | Unpolarized capacitor |
| C14 | 0.1u | Unpolarized capacitor |
| D1 | LED | Light emitting diode |
| FB1 | FerriteBead | Ferrite bead |
| J1 | USB_C_Receptacle_USB2.0_16P | USB 2.0-only 16P Type-C Receptacle connector |
| J2-J4 | Conn_01x04_Pin | Generic connector, single row, 01x04, script generated |
| J5 | Conn_01x06_Pin | Generic connector, single row, 01x06, script generated |
| R1,R8 | 10k | Resistor |
| R2,R3 | 5k1 | Resistor |
| R5-R7 | 1k5 | Resistor |
| SW1 | SW_SPDT | Switch, single pole double throw |
| Y1 | 16MHz | Four pin crystal, GND on pins 2 and 4 |