Loading design…
AbuPaad
Hardware mod for Casio FX-82/991ES calculators intended to be used with the NumOS project
| Reference | Value | Description |
|---|---|---|
| Q1 | DMP3099L | -3.8A Id, -30V Vds, P-Channel MOSFET, SOT-23 |
| U1 | TPS73125DBV | Cap free NMOS 150mA Low Drop 2.5V Regulator, SOT-23-5 |
| U5 | TP4056-42-ESOP8 | 1A Standalone Linear Li-ion/LiPo single-cell battery charger, 4.2V ±1% charge voltage, VCC = 4.0..8.0V, SOIC-8 (SOP-8) |
| U7 | TCA9535DBR | 16-bit I/O expander, I2C and SMBus interface, interrupts, w/o pull-ups, SSOP-24 |
| U8 | ESP32-S3-WROOM-2 | |
| C1 | 0.1 | |
| C2,C3 | 10uf | |
| C4 | 1uf | Unpolarized capacitor |
| C5 | 10µF | |
| D1,D2,D5 | 1N4001 | 50V 1A General Purpose Rectifier Diode, DO-41 |
| D8 | 1N5819 | 40V 1A Schottky Barrier Rectifier Diode, DO-41 |
| D15,D20 | LED | Light emitting diode |
| J2 | USB_C_Receptacle_USB2.0_16P |
| USB 2.0-only 16P Type-C Receptacle connector |
| J3 | Micro_SD_Card |
|---|
| J4 | Conn_01x02 | Generic connector, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| LDO1 | TPS73733DCQR | 1-A, ultra-low-dropout voltage regulator with reverse current protection & enable |
|---|
| R1-R3,R6,R13,R14 | 10k | Resistor |
|---|
| R7 | 1.25 | Resistor |
|---|
| R8,R9 | 5.1k |
|---|
| R10,R11 | 1k |
|---|
| R12 | 1.2 |
|---|
| R15-R17 | 100k | Resistor |
|---|
| REF**1 | PinHeader_2x09_P2.54mm_Vertical | Generic connector, double row, 02x09, top/bottom pin numbering scheme (row 1: 1...pins_per_row, row2: pins_per_row+1 ... num_pins), script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| S1 | Omron_XF2M-4015-1A_1x40-1MP_P0.5mm_Horizontal | Generic connector, single row, 01x40, script generated (kicad-library-utils/schlib/autogen/connector/) |
|---|
| SOt-23 | idk | 0.115A Id, 60V Vds, N-Channel MOSFET, SOT-23 |
|---|
| SW1,SW2 | SW_DPST_x2 | Single Pole Single Throw (SPST) switch, separate symbol |
|---|