Abhishek-TASK1
Abhishekog19
Components (19)
| Reference | Value | Description |
|---|---|---|
| U1 | ATmega328P-P | 20MHz, 32kB Flash, 2kB SRAM, 1kB EEPROM, DIP-28 |
| U2 | L7805 | Positive 1.5A 35V Linear Regulator, Fixed Output 5V, TO-220/TO-263/TO-252 |
| U3 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| U4 | L293D | Quadruple Half-H Drivers |
| C1,C2 | 22pF | Unpolarized capacitor |
| C3-C6 | 100uF | Polarized capacitor |
| C7-C10 | 100nF | Unpolarized capacitor |
| J1 | Barrel_Jack | DC Barrel Jack |
| J2 | ISP | Generic connector, double row, 02x03, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J3 | UART | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J4 | Motion_Sensor | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5 | Fire_Sensor | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6 | Pressure_Sensor | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J7 | RFID | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J8 | Motor_A | Generic screw terminal, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J9 | Motor_B | Generic screw terminal, single row, 01x02, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1 | 10k | Resistor |
| SW1 | SW_Push | Push button switch, generic, two pins |
| Y1 | 16MHz | Two pin crystal |