Loading design…
22060
ESC for bldc
| Reference | Value | Description |
|---|---|---|
| Q1-Q12 | RH6L040BGTB1 | N-MOSFET transistor, drain/source/gate |
| U1-U6 | L6387 | Half-Bridge Driver, 200V, 290/600mA, PDIP-8/SOIC-8 |
| U7 | AMS1117-3.3 | 1A Low Dropout regulator, positive, 3.3V fixed output, SOT-223 |
| U8,U9,U12 | ACS711xEXLT-15AB | ±15A Bidirectional Hall-Effect Current Sensor, +3.3V supply, 90mV/A, QFN-12 |
| U10 | BD4104 | |
| U11 | AMS1117-5.0 | 1A Low Dropout regulator, positive, 5.0V fixed output, SOT-223 |
| U13 | LM2937xMP | 500-mA Low Dropout Regulator, SOT-223 |
| U14 | MCP9700x-ETT | Low power, analog thermistor temperature sensor, ±4C accuracy, -40C to +125C, in SOT-23-3 |
| U15 | MAX40200AUK | Ideal Diode, Ultra-Low Voltage Drop, 1.5-5.5V, 1A, SOT-23-5 |
| U19 | STM32G431CBUx | STMicroelectronics Arm Cortex-M4 MCU, 128KB flash, 32KB RAM, 170 MHz, 1.71-3.6V, 42 GPIO, UFQFPN48 |
| button1,NRST1 | SW_Push | Push button switch, generic, two pins |
| BZ1 | Buzzer | Buzzer, polarized |
| C1,C3,C4,C6,C7,C9,C10,C12,C13,C15,C16,C18,C23,C32,C38,C39,C59,C61,C63 | 0.1u | Unpolarized capacitor |
| C2,C5,C8,C11,C14,C17,C21,C33-C37 | 1u | Unpolarized capacitor |
| C19,C20,C22 | 10u | Unpolarized capacitor |
| C24,C26,C28,C30,C31,C40-C57 | 22uF | Unpolarized capacitor |
| C25,C29 | 10uF | Unpolarized capacitor |
| C27 | 0.47uF | Unpolarized capacitor |
| C58,C60,C62 | 100u | Unpolarized capacitor |
| D1-D3 | 1N5819WS | 40V 600mV@1A 1A SOD-323 Schottky Barrier Diodes, SOD-323 |
| D13,D15-D17 | LED | Light emitting diode |
| D14 | WS2812B | RGB LED with integrated controller |
| J1,J2 | Conn_01x05_Pin | Generic connector, single row, 01x05, script generated |
| J3 | Conn_01x01_Pin | Generic connector, single row, 01x01, script generated |
| J4,J6 | Conn_01x06_Pin | Generic connector, single row, 01x06, script generated |
| J5,J7,J9 | Conn_01x02_Pin | Generic connector, single row, 01x02, script generated |
| J8 | Conn_01x04_Pin | Generic connector, single row, 01x04, script generated |
| L1,L3 | L | Inductor |
| R1,R2,R7,R8,R11,R12,R15,R16,R19,R20,R23,R24 | 22 | Resistor |
| R3-R6,R9,R10,R13,R14,R17,R18,R21,R22,R25,R26,R57 | 10k | Resistor |
| R29 | 100 | Resistor |
| R43 | 120 | Resistor |
| R44,R45,R51 | 5m | Resistor |
| R46,R47,R52 | 1.5k | Resistor |
| R48,R49,R54 | 68k | Resistor |
| R50,R53,R55,R59 | 2.2k | Resistor |
| R56 | 22k | Resistor |
| R58 | 4.7k | Resistor |
| SW2 | SW_Nidec_CAS-120A1 | Switch, single pole double throw |
| TP1-TP12 | TestPoint | test point |