Loading design…
0x007E
MeGARCard - Development Platform
| Reference | Value | Description |
|---|---|---|
| Q9-Q13 | AO3416 | 30V Vds, 5.7A Id, N-Channel MOSFET, SOT-23 |
| U1 | FT230XS | Full-Speed USB to Basic UART, SSOP-16 |
| U2 | TS3USB30EDGSR | ESD-Protected, High-Speed USB 2.0 (480-Mbps) 1:2 Multiplexer/Demultiplexer Switch With Single Enable, VSSOP-10 |
| U3 | 74AHC1G14 | Single Schmitt NOT Gate, Low-Voltage CMOS |
| U4 | TPS2116DRL | 2 Channnels Power Mux with Manual and Priority Switchover, 1.6-5.5V Input Voltage, 2.5A Output Current, Ron 40 mOhm, SOT-583-8 |
| U5 | LM1117DT-3.3 | 800mA Low-Dropout Linear Regulator, 3.3V fixed output, TO-252 |
| U6 | TBD62783A | 8-Channel Source Type Transistor Array, TTL and CMOS compatible, 500mA, 50V, DIP-18/SOP-18/SSOP-18/SOIC-18W |
| U7 | MB85RC04V | 16kbit I2C serial EERAM, SRAM with EEPROM backup, 2.7-3.6V, DIP-8/SOIC-8/TSSOP-8 |
| BZ1 | Buzzer | |
| C1,C4-C6,C8,C12,C13 | 100n | Unpolarized capacitor |
| C2 | 10n | Unpolarized capacitor |
| C3,C7,C10,C11 | 100u | Polarized capacitor |
| C9 | 47u | Polarized capacitor |
| C14 | n.B. | Polarized capacitor |
| D0-D5,D10,D11 | Green | Light emitting diode |
| D6,D12 | Yellow | Light emitting diode |
| D7,D9 | Red | Light emitting diode |
| D13 | B360A | Schottky diode |
| D14,D15 | BAT43 | Diode |
| F1 | 1A | Fuse |
| FB1 | 70Ω/100Mhz/3A | Ferrite bead, small symbol |
| J1 | USB_C_Receptacle | USB 2.0-only 16P Type-C Receptacle connector |
| J2,J18-J20 | Conn_01x02_Pin | Generic connector, single row, 01x02, script generated |
| J3,J7,J11-J13 | 103R012BB100 | |
| J4 | Conn_02x03_Odd_Even | Generic connector, double row, 02x03, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J5 | Conn_02x05_Odd_Even | Generic connector, double row, 02x05, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J6 | Conn_01x04 | Generic connector, single row, 01x04, script generated (kicad-library-utils/schlib/autogen/connector/) |
| J8,J9,J17 | Conn_01x01_Pin | Generic connector, single row, 01x01, script generated |
| J10 | Conn_01x04_Pin | Generic connector, single row, 01x04, script generated |
| J14,J15 | Conn_02x10_Odd_Even | Generic connector, double row, 02x10, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/) |
| J16 | Conn_01x03 | Generic connector, single row, 01x03, script generated (kicad-library-utils/schlib/autogen/connector/) |
| R1-R6,R38 | 270 | Resistor |
| R7,R8,R43 | 330 | Resistor |
| R9,R10,R31,R32,R34,R41,R45,R50,R51,RV1 | 10k | Potentiometer,Resistor |
| R25-R28,R36,R37,R47 | 3k3 | Resistor |
| R29,R30 | 5k1 | Resistor |
| R33,R35,R39 | 150 | Resistor |
| R40,R42 | 1k | Resistor |
| R44,R48,R49 | 47R | Resistor |
| R46 | 10R | Resistor |
| SW0-SW3,SW5 | SW_SPST | Single Pole Single Throw (SPST) switch |
| SW6 | SW_DIP_x02 | 2x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol |